24v 500W Solar Panel Off Grid Caravan Boat Camping MPPT Battery Inverter Kit

Sold Out - Backorder Available

Calculate Shipping

Kit includes:

2 x 250w Monocrystalline Solar Panel ( 12 years product , 25 years output warranty)

1 x Tracer 20A MPPT solar charge controller

2 x Pro Power 150ah AGM deep cycle battery

1 x fangpusum 600w/1200w pure sine wave inverter

1 x DC Isolator Switch with MC4 Connectors


Solar Panel

The Monocrystalline Delta Black Module Series is a module built for the UK, now they are available in AUS.

World First 100% ALL BLACK PV Module.

World First ALL BLACK PV Module Certified by TUV.

12 Years Product Warranty ( For the Solar panel )

Available in all black, this solar panel would probably be Batman's choice of solar panel, if Batman was searching for such an item in Aus. The flagship model of the Perlight Rooftop Solar Panel range, the 250W output solar panel is a serious piece of kit.

A world first that's great for the environment AND saves you money is bound to pique the interests of many of you that are looking to reduce those energy bills or do your bit in the fight against global warming. Whatever your motivation for getting solar panels, the Perlight 24V 250W Rooftop Solar Panel is the way to do it efficiently, and in style.

While its pretty much guaranteed to look awesome mounted on anyone's roof, the company's guarantees are probably of more interest, they are offering a 12 year 90% Power-Max Performance Guarantee and a 25 year 80% Power-Max Performance Guarantee. What does this mean? It means that they are so confident that, after 25 years, your solar panel will still be working to 80% efficiency, that they're willing to guarantee against it.


Overall, the Perlight 24V 250W Rooftop Solar Panel is your best choice for a high powered, high efficiency solar panel that will look awesome on any roof that you put it on.

The Delta Black Series from Perlight   Features
  • Monocrystalline
  • Excellent build quality
  • Superb Performance
  • Extremely reliable screw-less,
    interconnected frame
  • 8 mounting holes for direct mounting
  • fixable on long and short sides,
    using mounting clamps
  • 20 in-built drainage waterspouts,
    help prevent frost damage
  • 2 Earth (Ground) points
  • 60 cell Monocrystalline module
  • 250W output capacity
  • Compatible with all mainstream mounting systems
  • Compatible with all roof types
  • 100% in Black
  • Static load passed protection bar
  • 12-year warranty
    • 12-year 90% Power-Max Performance Guarantee
    • 25-year 80% Power-Max Performance Guarantee
Fully Certified and Independantly Tested   Dimensions & Weight
  • MCS certified
  • Fire Safety Certified
  • Ammonia certified
  • Salt Mist certified
  • PID Free
  • ISO14001 accredited facilities
  • ISO9001 accredited facilities 
  • UL 1703, CEC for California, FSEC for Florida, TUV, CE, VDE
  • CEC approved for rebates
  • High reliability bypass diodes
  • Lock mechanism equipped connectors (MC4)
  • Modules  are  IEC61730  safety  rated  for  high  wind  pressure,   hail  impact,  snow  load  and  fire
Cell Size (mm) 156 x 156
Module Size (mm) 1650 x 992 x 40
Number of cells per module 60 (6x10)
Weight (kg) 18.5
Spec Sheet  
Download PDF  


About Perlight Solar    


Perlight Solar: 1982-2015
The Perlight Solar parent group is proud to be celebrating our 33rd anniversary this year. Over this time the group has grown from a small family run business to a large international company with hundreds of millions of dollars in annual revenue. Rest assured that with three decades of history and growth, our 25 year warranties really mean something.

Recent Projects    








For this rural farm in Alloway, NJ a handmade wooden racking system was constructed with SMA inverters.


A fixed angle rooftop system mounted across 4 different rooftops at our world headquarters. Using solar power to make solar modules.

Product Specs:
1950x185w modules



Charge Controller

EPSOLAR Tracer series controller adopts MPPT technology (Maximum Power Point Tracking). This advanced tracking algorithm makes the solar module operate at an ideal voltage where the solar modules can produce the maximum available power. Compared to conventional PWM controllers, MPPT technology increases the charge efficiency by up to 30% and decreases the power of solar array needed.

The regulator has the ability to step-down the higher voltage solar array to recharge a lower voltage battery bank. This allows on grid solar modules or thin film modules to charge the off-grid battery, and the cable size can be reduced because of the small current from the solar array.


  • MPPT technology
  • Peak conversion efficiency of 97 %
  • High Tracking efficiency of 99%
  • Several seconds tracking speed
  • Very fast Sweeping of the entire I-V curve
  • 4 stage battery charge


  • Excellent thermal design and natural air cooling
  • Full power output in ambient temperatures up to 45oC
  • Temperature compensation function
  • Sealed, Gel, Flooded battery type options
  • Diversified load control: Manual, Dusk to Dawn, Dual timer, TEST
  • RJ45 interface with optional remote meter
  • CE certificate

Electronic protections:

  • PV Array Short Circuit
  • PV Overvoltage/Overcurrent
  • Load Overload
  • Load short circuit
  • PV Reverse Polarity
  • Battery Reverse Polarity
  • High Voltage Transients
EPSolar 20A MPPT Regulator
Physical Specifications
Dimensions 169mm x 118mm x 83mm
Mounting holes 160mm x 80mm
Terminal 10mm2
Weight 0.95kg
Electrical Specifications
System Voltage 12VDC/24VDC Automatic
Rated battery current 20A
Maximum battery voltage 32V
Max solar input voltage 100VDC
Max PV input power 12V system 260W
24V system 520W
Self-consumption <10mA(24V)
Charge circuit voltage drop ≤0.26V
Discharge circuit voltage drop ≤0.15V
Communication TTL232 / 8pin RJ45
Battery Charging
Charging Mode Four stages
Temp. Compensation -30mV/oC/12V (25oC)
Environmental Specifications
Working temp. -35oC ~ +55oC
Storage temp. -35oC ~ +80oC
Humidity 10%-90% (NC)
Protection IP30 (indoor)



This model is used in a wide range of application including remote homes, RVs, sailboats and powerboats.
It will operate most televisions and VCR, personal computers, small appliances and tools such as drills, sanders, grinders, mixers and blenders.To get the most out of the power inverter, it must be installed and used properly. Please read the instructions in this manual before installing and using this model.

Technical Data 

 Model NO.



AC voltage


Continuous power


Surge power



Pure sine wave 

Frequency 50HZ±3%
AC regulation ±5%
Receptacles 2 pcs for type2, 1pcs for type 3 4 5 6
LED indicator Green LED for power on; red LED for power fail ure status


DC current


No load current draw


DC voltage


Voltage range 10.5-16VDC(12V)/21-32VDC(24V)/42-64(48V)
Efficiency(Typ) >87%
DC connector Cable*1pc  
Fuse 1pc 3pcs  
BAT. lowalarm   11±0.5v(12v)/22±1v(24v)/44±2v(48)
BAT. lomshutdown   10.5±0.5v(12v)/21±1v(24v)/42±2v(48)
Over voltage   16±0.5v(12v)/32±1v(24v)/64±2v(48)
Over temperature   55±5°C
Short circuipro tection   Shut-off
BAT. Polarity   Fuse burn out
Over load   Re-start 2 times, shut down in failed
Working humidity   20%--90% rh non-condensing
Storagetemp.humidity   -30--+70°C/--22F, 10—95%rh
Temp. coefficient   ±0.05%°C(0-55°C)


Quick hook - up and testing

If you would like to quickly hook-up the power inverter and check its performance before going ahead with your installation, please follow these guidelines:
1. Unpack and inspect the power inverter, check to see that the power switch is in the OFF position.
2. Connect the cables to the power input terminals on the rear panel of power inverter. The red terminal is positive (+) and black terminal is negative (-). Connect the cables into the terminals and tighten the wing nut to clamp the wires securely.
3. Connect the cable from the negative terminal of the inverter to the negative terminal of the power source. Make a secure connection.
Loosely tightened connectors result in excessive drop and may cause overheated wires and melted insulation.
4. Before proceed further, carefully check that cable you have just connected connects from the negative terminal of inverter to the negative output terminal of the power source.
Reverse polarity connection will blow a fuse in inverter and may permanently damage the inverter. Damage caused by reverse polarity connection is not covered by our warranty.
5. Connect the cable from the positive terminal of inverter to the positive terminal of the power source. Make secure connection.
You may observe a spark when you make this connection since current may flow to charge capacitors in the power inverter. Do not make this connection in the presence of flammable fumes, explosions or fire may result.
6. Set the power switch to the ON position. Check the meters and indicators on the front panel of the inverter.
If does not, check your power source and the connections to inverter. The other indicators should be off.
7. Set power inverter switch to the OFF position, the indicator lights may blink. Plug the test load into the AC receptacle on the front panel of the inverter. Please keep switch in off position.
8. Set power inverter switch to the ON position, the inverter should supply power to the load.
1. Where to install
The power inverter should be installed in a location that meets the following requirements:
a. Dry - Do not allow water to drip or splash on the inverter.
b. Cool - Ambient air temperature should be between 0℃ and 40℃, the cooler the better.
c. Ventilated - Allow at least one inch of clearance around the inverter for airflow. Ensure the ventilation openings on the rear and bottom of the unit are not obstructed.
d. Safe - Do not install the inverter in the same compartment as batteries or in any compartment capable of storing flammable liquids such as gasoline.
2. Cables
DC to AC inverters require high amperage/low voltage DC power to low amperage/high voltage AC power. To operate properly connect inverter DC input terminals direct to battery with heaviest wire available see chart below:

Max    Watts Out

Approx.    Amps

Teq'dWire    Gauge


















#6    or 2×#10

3. Grounding
The power inverter has a lug on the rear panel chassis ground. This is to connect the chassis of the power inverter to the ground. The ground terminals in the AC outlets on the front panel of the inverter are also connected to the ground lug.The chassis ground lug must be connected to a grounding point, which will vary
depending on where the power inverter is installed. In a vehicle, connect the chassis ground to the chassis of the vehicle.
In a boat, connect to the boat's grounding systems. In a fixed location, connect the chassis ground lug to earth.
The neutral (common) conductor of the power inverter AC output circuit is connected to the chassis ground. Therefore, when the chassis is connected to ground, the neutral conductor will also be grounded .This conforms to national electrical code requirements that separately derived AC sources (such as inverters and generators) have their neutral tied to ground in the same way that the neutral conductor from the utility line is tied to ground at AC breaker panel.
The negative DC input of the power inverter is connected to the capacitance, then to the ground a positive ground DC system.
A positive ground DC system has the positive terminal of the battery connected to the chassis of the vehicle or to the grounding point.
Do not operate the power inverter without connecting it to ground. Electrical shock hazard may result.
To operate the power inverter, turn it on using the ON/OFF switch on the front panel. The power inverter is now ready to deliver AC power to your loads. If you are operating several loads from the power inverter, turn them on separately after the inverter has been turned on. This will ensure that the power inverter does not have to deliver the starting currents for all the loads at once.
Controls and indicators
The ON/OFF switch turns the control circuit in the power inverter on and off. It does not disconnect power from the power inverter.
Operating limits
1.Overload / Auto re-start
The inverter would operate most AC loads within its power rating. If the load is over the specification, HT-S-300 will auto re-start 5 times, if not success, the inverter will shut down automatically.



The buzz will be noisy if the    temperature is

Television    interference :

too high, then the inverter    will be shut down

Operation    of the power inverter can

automatically. Please re-set it    after the

interfere    with television reception on

inverter got cooling.

some    channels. If this situation occurs,

Note1:  The speed of fan operation will

the    following steps may help to

change 5-stage to follow the    inverter

alleviate    the problem.

internal temperature.

-Make    sure that the chassis ground


lug on    the back of the power inverter is


solidly    connected to the ground system

3.Input voltage

of your    vehicle, boat or home.

The power inverter will operate    from input

-Do not    operate high power loads with

voltage range 10V-15 (12V) or    20V - 30V

the    power inverter while watching

(24V).    If the voltage drops too low(※1) or


raise    too high(※2),the inverter will shut

-Make    sure that the antenna feeding

down automatically. Before shut    down, buzz

your    television provides an adequate

noise will warn you.

(snow    free) signal and that you are


using    good quality cable between the


antenna    and the television.

※1:<10.3V(12V    spec) or <20.6V(24V spec)

-Move    the television as far away from


the    power inverter as possible.

※2:<15V(12V    spec) or <30V(24V spec)

-Keep    the cables between the battery


and the    power inverter as short as


possible    and twist them together with

4.Frequency Switchable

about 2    to 3 twists per foot. This

Adjust 50/60 HZ through the    switchable

minimizes    radiated interference from

button.Buzz noise will remind    you:

the    cables.






Very    little maintenance is required to


keep    your inverter operating properly.

Please turn on the inverter    again when

You    should clean the exterior of the

you change frequency.

unit    periodically with a damp cloth to


prevent    accumulation of dust and dirt.


At the    same time, tighten the screws


on the    DC input terminals.

Troubleshooting  guide


possible cause



Battery    voltage too high

Check    for fault with



battery    charging system.



Manually    reset inverter



by    turning switch to "on"





Battery    voltage too low

Charge    battery. Manually



reset    inverter by turning



switch    to "on" again.





Battery    current too high,

Reduce    load on the


probable    AC overload






System    over-temperature

Improve    ventilation and



cooling    and / or reduce



load on    the inverter.


Overload    or system

Ensure    all loads and


hardware    fault

disconnected.    Try to



reset    the unit by



switching    to "on" if unit



still    does not operate,



contact    your distributor/



merchant/    retailer for



service/    warranty





Moving towards the higher end of our midrange batteries, we have the Pro Power 12 Volt 165AH Deep Cycle Battery. The Pro Power batteries are the backbone of our outdoor electrical goods items, for high quality, reliable appliances, you need high quality power behind them. No other battery is better suited for our own products - than our own batteries.

Pro Power prides itself in maintaining some of the most rugged and durable batteries on the market. This means that, whether you need an extra power supply in your garden, or need one because you’re in the middle of the desert, Pro Power will not let you down regardless.

One of the big selling points for our products is how long they last. Each of our batteries are expected to have a 12 year lifespan and are also garanteed up to three. This is because we know that the craftsmanship that went into building this thing is top of the range, and we won;t settle for anything less. 


Why Pro Power AGM (Absorbent Glass Mat) Deep Cycle Battery

  • Spill-proof through acid encapsulation in matting technology
  • Can be rotated and placed on its side
  • Maintenance Free Operation
  • High specific power, low internal resistance, responsive to load
  • Up to 5 times faster charge than with flooded technology
  • Long Lasting
  • Water retention (oxygen and hydrogen combine to produce water)
  • Vibration resistance due to sandwich construction
  • Stands up well to cold temperature
  • High Cycle life (1650 cycles)
  • Designed Service life 12 years
  • 3 Years Warranty
Pro Power 12V 165AH AGM Deep Cycle Battery
Nominal Voltage 12V
Nominal Capacity (20HR) 150.0 AH
Dimension Length: 484 ±2mm (19.05 inches)
Width: 170 ±2mm (6.69 inches)
Container Height: 241 ±2mm (9.49 inches)
Total Height (with Terminal): 241 ±2mm (9.49 inches)
Approx Weight Approx 43.5 Kg
Terminal T11
Container Material ABS
Rated Capacity 150.0 AH/8.25A (20hr,1.80V/cell,25°C)
Max. Discharge Current 1500A (5s)
Internal Resistance Approx 2.5m?
Operating Temp.Range Discharge : -15 ~ 50oC (5 ~ 122oF)
Charge : 0 ~ 40oC (32 ~ 104oF )
Storage : -15 ~ 40oC (5 ~ 104oF)
Nominal Operating Temp. Range 25 ± 3°C (77 ± 5°F )
Cycle Use Initial Charging Current less than 45A.
Voltage 14.4V~15.0V at 25oC (77o F)
Temp. Coefficient -30mV/oC
Standby Use No limit on Initial Charging Current
Voltage 13.5V~13.8V at 25oC (77o F)
Temp. Coefficient -20mV/oC
Capacity affected by Temperature 40oC (104oF) 103%
25oC ( 77oF ) 100%
0oC ( 32oF ) 86%
Self Discharge Pro Power Deep Cycle AGM batteries may be stored for up to 6 months at 25oC(77oF) and then a freshening charge is required. For higher temperatures the time interval will be shorter.


SKU OG-500w-24v
Shipping Cubic 0.030474m3

Be The First To Review This Product!

Help other OziMall users shop smarter by writing reviews for products you have purchased.

Write a product review

Others Also Bought

More From This Category